NETGEAR M4250-26 G4XF-PoE+ AV Line 26-Port Managed Switch. The NETGEAR M4250-26G4XF-PoE+ (GSM4230PX) AV Line 24-Port Managed Rackmount Gigabit PoE+ Switch was designed with input from AV Professionals. The result is a switch built from the ground up to support 1Gb audio and video over IP with customised hardware and software along with dedicated service and support. The rear-facing ports ensure a clean integration in AV racks.
Twenty-four (24) port 10/100/1000BASE-T (RJ45) PoE+ with 480W PoE budget. Two (2) port 10/100/1000BASE-T (RJ45). Four (4) port 1000/10GBASE-X (SFP+).
132 Gbps non-blocking fabric across 30 ports. Out-of-band 1G Ethernet management port.
USB-C and RJ45 RS232 console ports and USB-A storage port. Front black display panel and all ports in the back. Possible reversed mounting with ports in the front.
Longer brackets for recessed mounting (2 inches / 5 cm). Threaded hole in front (1xM10) for clamps.Threaded holes on the bottom (4xM5) for 50x100mm VESA plates. Selectable fan modes for fanless, quiet, or cool operation. Easier configuration with AC GUI The AV-oriented, web-based GUI permits factory or user-specified profiles to be assigned to individual ports as needed.
Use in noise-sensitive environments Adjustable fans can be turned off if certain conditions are met. Even the default Quiet mode is quieter than most other switches. Get up and running fast with little engineering time required The NETGEAR IGMP Plus feature is set from the factory to ensure out-of-the-box functionality for most AV over IP installations.Multiple mounting options provide ultimate flexibility Threaded mounting holes sized to industry standards are built into the chassis for mounting behind a display or clamped to a truss. Built for AV over IP. Designed for out-of-the-box use NETGEAR IGMP Plus enables instant multicast functionality for most AV over IP installations. Dedicated AV web-based GUI interface Unique interface designed for the AV professional with colour-coded, port-based profiles. Profiles for common audio protocols Quickly assign profiles to ports for Dante, AES67, and AVB audio configurations (AVB requires a separate licence, not included).
Video profiles built-in Special profiles for NVX, SVSI, Q-SYS and Dante video profiles can be easily assigned to ports as needed. Unique Automatic Configuration Auto-trunk and auto-lag functionality automatically configures other M4250 switches for use in star topology. Rackmount versatility 1U, 400mm deep rackmount with all power and Ethernet ports on the back. Reversed mounting possibility Possible reversed mounting with ports in the front including recessed mounting to protect cables.
Universal mounting availability Mounting outside the rack made possible with bottom M5 and front M10 threaded holes. Adjustable fan functionality Quiet mode with. Multi-switch link aggregation Twenty-four (24) 1G PoE+ with 480W PoE budget, plus two (2) additional 1G ports and four (4) SFP+ 10G fibre uplinks. Layer 2/Layer 3 Switching Common Layer 2 and Layer 3 switching engine. Control methods abound Built-in IT web GUI, console, telnet and SSH consistent with other NETGEAR switches in the series.Standard network features Feature set includes static, RIP and PIM routing, DHCP Server and PTPv2.